John-lewis JLDWW 1203 User Manual

JLDWW 1203dishwasherInstruction manual

10Electrical connectionAny electrical work required to install this appliance shouldbe carried out by a qualified electrician or competent per-son.1 W

11The Control Panel1. On/Off indicator light2. On/Off button3. Function buttonsIn addition to the dishwashing programme selected, the fol-lowing funct

128. Control indicator lights The salt and rinse aid indicator lights are never illuminatedwhile a washing programme is running even if filling with s

13When the dishwasher is first installedBefore using your dishwasher for the first time:1. Ensure that the electrical and water connections complywith

14Setting the Water SoftenerThe water softener must be set manually and electronically:a) Setting manuallyThe dishwasher must be switched off. 1. Open

15Rinse AidRinse aid is automatically added during the last rinse.Rinse aid will ensure the water flows away easily from thecrockery, ensuring thoroug

16Activating rinse aid inflow when “Multi tab“ function is selected3 If the “Multi tab“ function is not selected, the rinseaid inflow is always activa

17Using the Dishwasher• Check if it’s necessary to refill with dishwasher salt orrinse aid.• Load cutlery and dishes into the dishwasher.• Fill with d

18Open the door and slide out the baskets to load the dishes.The lower basketThe lower basket is designed to take saucepans, lids, plates,salad bowls,

19The upper basketThe upper basket is designed for plates (dessert plates, sau-cers, dinner plates of up to 24 cm in diameter), salad bowls,cups, glas

21 Important Safety InformationIt is most important that this instruction book should be retained with the appliance for fu-ture reference. Should the

20Adjusting the Height of the Upper BasketIf washing very large plates you can load them in the lowerbasket after moving the upper basket to the highe

21Different kinds of detergentConcentrated DetergentsModern detergents for dishwashers are almost exclusivelylowalkalineconcentrated detergents with n

22Washing programmes ProgrammeDegree of soil and type of loadHalf load op-tionCycle description Consumption values 1)Energy consumpt.(in kWh)Water con

23Starting a washing programmeCheck that the baskets have been loaded correctly and that the spray arms can rotate freely.Turn on the water tap.Close

241 Carefully open the door. Hot steam may escape.• Hot dishes are sensitive to knocks. Therefore leave thedishes to cool for about 15 minutes before

25Maintenance and cleaningClean the external surfaces of the machine and control pan-el with a damp soft cloth. If necessary use only neutral de-terge

26Upper basket spray arm1. To remove upper basket spray arm, tilt it down hard.2. Clean spray arms jets.3. Place cleaned upper basket spray arm back i

27Something Not WorkingIf the dishwasher is not working correctly, please carry out the following checks, before contacting your local Service Forceag

28 ...the wash results are not satisfactoryThe dishes are not clean• The wrong washing programme has been selected.• The dishes were arranged in such

29Repairs - After Sales ServiceIf your dishwasher is not performing satisfactorily; consultthe fault finding guides within this instruction book (Some

3Maintenance and cleaning• All filters must be checked and cleaned on a regular basis- dirty filters will degrade the wash performance of thedishwashe

30

31

John Lewis Partnership 171 Victoria Street London SW1E 5NN www. johnlewis.com 822 612 854-00-06 04/06

4Contents For the UserImportant Safety Information 2· Installation 2· Child Safety 2· Use 2· Maintenance and cleaning 3· Service 3· Ecological hints 3

5Description of the Appliance Ceiling spray armUpper basket spray arm and lower spray armWater softenerunit.Salt ContainerDetergentDispenserRinse aid

6Installation1 It is dangerous to alter the specifications or attemptto modify this product in any way.1 Care must be taken to ensure that the applian

7Unpacking• Remove all packaging before positioning the machine.• If possible, position the machine next to a water tap and adrain.Water connectionsWe

8Connecting SystemsThe water inlet hose, drain hose and the mains cable mustall be connected to the side of the dishwasher as there is nospace for the

9Proceed as follows:1. Unscrew the screws from the elbows at the rear (1).2. Push the appliance’s worktop backwards about 1 cm (2).3. Lift the worktop