John Lewis JLWFF110X User Manual download pdf (Page 12)

Push button

A. Mains indicator light (green)

B. Wine cooler button On/Off

C. Temperature setting button (+) (for warmer

temperatures)

D. Temperature display

E. Temperature setting button (-) (for colder

temperatures)

OffOn /

Cooler

˚C

OffOn /

˚C

Cooler

Freezer

Alarm off

Quick

freeze

Freezer

˚C

The control panel wine cooler

When the wine cooler is first

installed

Warning

Allow the appliance to stand for 2 hours after

installation.

Insert the plug into the wall socket.

Press On/Off, button B can function the Wine

cooler separately with the appliance in function.

The green mains indicator light illuminates.

Press either the “C“ (+) or “E“ (-) button. The

temperature display switches over and the DESIRED

temperature currently set flashes on the

temperature display.

Set the required temperature by pressing the “C“

(+) or “E“ (-) buttons (see section "Temperature

setting buttons"). The temperature display will

immediately show the changed setting. Each time the

button is pressed the temperature is adjusted by 1

°C.

Once the required temperature has been set, after a

short period (approx. 5 sec.) the temperature

display will change and again indicate the current

ACTUAL temperature inside the Wine Cooler.

The display will change from flashing to continuous

illumination.

Information! When the setting is changed, the

compressor does not start immediately if automatic

defrosting is currently taking place. As the storage

temperature within the Wine cooler is reached

quickly you can store beverage immediately after

switching on.

Important: If the wine cooler is switched off,

the door must be closed to ensure that the

freezer is working properly.

When switched off, the electronic control of

the appliance functions automatically and

periodically circulating the air to prevent

unpleasant smells and humidity within the

compartment.

Temperature setting buttons

The temperature is adjusted using the “C“ (+) and

“E“ (-) buttons.These buttons are connected to the

temperature display.

The temperature display is switched over from the

display of the ACTUAL temperature (Temperature

display is illuminated) to the display of the DESIRED

temperature (Temperature display flashes) by

pressing one of the two buttons,“C“ (+) or “E“ (-).

Each time one of the two buttons is pressed again

the DESIRED temperature is adjusted by 1 °C. The

DESIRED temperature will be reached within 24

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 23 24

Comments to this Manuals

No comments

John Lewis JLWFF110X User Manual Page 12

Comments to this Manuals

Related products and manuals for Combi-fridges John Lewis JLWFF110X