JLHDA934Built-in cooker hoodInstruction manual
10To operateSelect the required fan speed and light if required.RecirculationIn the recirculation mode the contaminated air enters the cooker hood thr
11 Before carrying out any maintenance or clean-ing isolate the cooker hood from the mains supply. The cooker hood must be kept clean, as a build up
12 Alarm signal reset• Stop the motor and switch off the lights.• Press T3 and hold for at least 3 seconds, until LED ashes three
13 Reset the alarm signal• Stop the motor and switch off the lights.• Press T3 and hold for at least 3 seconds, until LED ashes th
14Something not workingRepairs and after sales serviceIf the appliance is not working correctly, please carry out the following checks, before contact
991.0368.968_01 - 150319John Lewis Partnership171 Victoria StreetLondon SW1E 5NNwww.johnlewis.com
2Important safety information It is most important that this instruction manual should be retained with the appliance for future ref-erence. Should t
3For the UserImportant Safety Information 2Description of the Appliance 4Using the cooker hood 9Cooker Hood Controls 9To Operate 10Recirculation
4Description of the appliance
5Please ensure that when the appliance is in-stalled it is easily accessible to an engineer in the event of a breakdown. All installations must compl
6 Fitting the wall brackets• Draw a vertical line on the supporting wall up to the ceiling, or as high as practical, at the centre of the
7Extraction (Ducted)The cooker hood is more effective when installed in the extraction mode (ducted to the outside).Venting kits may be purchased thro
8Electrical connection Electrical requirementsAny permanent electrical installation must comply with the latest I.E.E. Regulations and local Electrici
9Using the cooker hoodThe cooker hood is designed to extract unpleasant odours from the kitchen, it will not extract steam. The appliance can be insta
Comments to this Manuals