John Lewis JLBIDW1201 User Manual download pdf (Page 17)

Fill with detergent

30

20

1.

Press the release button (3) to open the

lid (4) of the detergent dispenser.

2.

Put the detergent in compartment (2).

3. If the washing programme has a prewash

phase, put a small quantity of detergent

in compartment (1).

4. If you use detergent tablets, put the

tablet in compartment (2).

5. Close the lid. Make sure that it locks into

position.

Detergent tablets from different

manufacturers dissolve at different

rates. For this reason, some

detergent tablets do not attain their

full cleaning power during short

washing programmes. Therefore,

please use long washing programmes

when using detergent tablets, to

ensure the complete removal of

detergent residual.

Using combi detergent

tablets

When you use tablets, that contain salt and

rinse aid, do not fill the salt container and

rinse aid dispenser.

Be sure that these tablets are applicable for

the water hardness in your area (refer to the

instructions on the packaging of the

products).

1. Adjust manually and electronically the

water softener to the lowest level.

2. Set the dosage of rinse aid dispenser to

the lowest position.

Using again separately

detergent, salt and rinse aid

1. Fill the salt container and the rinse aid

dispenser.

2. Adjust manually and electronically the

water softener to the highest level.

3. Start a washing programme without

dishes.

4. When the washing programme is

completed, adjust the water softener to

the water hardness in your area.

5. Adjust the rinse aid dosage.

17

1 ... 16 17 18 ... 32

Comments to this Manuals

No comments