John Lewis JLDWS1226 User Manual download pdf (Page 25)

The washing and drying results are not satisfactory

Incorrect level of the water

softener adjustment.

Adjust the water softener with

the correct level.

The salt container cap is not

closed correctly.

Make sure that the salt

container cap is closed

correctly.

There are streaks, whitish

stains, or a bluish layer on

glasses and dishes.

The rinse aid quantity is too

high.

Decrease the rinse aid quantity.

Dry water drop stains on

glasses and dishes.

The rinse aid quantity is too

low.

Increase the rinse aid quantity.

The detergent can be the

cause.

Use a different brand of

detergent.

The dishes are wet. The washing programme was

without a drying phase.

Set a programme with the

drying phase.

The dishes are wet and matt. The rinse aid dispenser is

empty.

Fill the rinse aid dispenser with

rinse aid.

The Multi tab function is on

(this function automatically

deactivates the rinse aid

dispenser).

Activate the rinse aid dispenser.

Activating the rinse aid

dispenser

1. Switch on the appliance. The appliance

must be in setting mode.

Press and hold function button (B) and

function button (C) simultaneously until

the indicators of function buttons (A),

(B) and (C) start to flash.

Release function button (B) and function

button (C).

Press function button (B), the indicators

of function buttons (A) and (C) go off

while the indicator of function button

(B) continues to flash. The display shows

the current setting.

Rinse aid dispenser

deactivated

Rinse aid dispenser

activated

Press function button (B) again. The

display shows the new setting.

6. Switch off the appliance to confirm the

operation.

1 ... 24 25 26 27 28 29 30 31 32

Comments to this Manuals

No comments

John Lewis JLDWS1226 User Manual Page 25

Comments to this Manuals

Related products and manuals for Dishwashers John Lewis JLDWS1226