John Lewis JLDWW1206 User Manual download pdf (Page 28)

Proceed as follows:

Remove the machine’s worktop by

unscrewing the two rear retaining screws (1),

pull the worktop from the back of the machine

(2) and slide out the front slots, lifting the

worktop (3).

Insert the machine after adjusting the levelling

with the adjustable feet. When inserting the

machine, ensure that the water inlet and drain

hoses are not kinked or squashed.

During all operations that involve accessibility

to internal components the dishwasher has to

be unplugged.

Be sure that once the appliance has been

installed, it is easily accessible for the service

engineer in the event that a repair is required.

If the dishwasher is later used as a free-

standing appliance, the original worktop must

be re-mounted.

The plinth on free-standing appliances is not

adjustable.

Levelling

Good levelling is essential for correct closure

and sealing of the door. When the appliance

is correctly levelled, the door will not catch on

either side of the cabinet. If the door does not

close correctly, loosen or tighten the

adjustable feet until the machine is perfectly

level.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 34 35 36

No comments

John Lewis JLDWW1206 User Manual Page 28