John Lewis JLWM1427 Installation Manual download pdf

Safety and installation

During installation, please switch

the power off and ensure your

appliance is NOT connected to the

electricity supply.

✓ You have removed 3 transit bolts and 3 spacers (See Point 1)

✓ The water connections are not leaking (See Point 2)

✓ The drain hose is positioned to the correct height (See Point 3)

✓ The sink trap blanking plug has been removed, or the end has been cut off the

outlet pipe (See Point 3)

✓ The machine is level and cannot ‘rock’ when spinning - adjust the feet (See Point 5)

There are 3 transit bolts ﬁ tted at the rear of the

machine to prevent damage in transit.

These bolts and their plastic spacers

MUST be removed before use.

For more detailed information

please refer to the instruction

manual.

Check list

1. Transit bolt removal

Important

Instructions

1 2 3 4

Summary of Contents

Page 1 - Safety and installation

Safety and installationDuring installation, please switch the power off and ensure your appliance is NOT connected to the electricity supply. ✓ You

Page 2

ABCStep AUnscrew the 3 bolts.Step BHold the transit bolt and pull out the bolt and spacer.Step CFor safety place the plastic cover provided over the h

Page 3 - Under a sink

3. Connecting to the drain/standpipe3 pin30 cm(12’’)min. 60 cm(23.6’’)max. 100 cm(39.4’’)A. Form a hook in the end of the drain hose using the ‘U piec

Page 4 - Guarantee

ServiceGuaranteeThis product should only be repaired or serviced by an authorised service engineer and only genuine approved spare parts should be use