John Lewis JLBIGH603 User Manual Page 5

  • Download
  • Add to my manuals
  • Print
  • Page
    / 28
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 4
Safety instructions
This appliance is suitable for the following
markets: GB IE
Installation
Warning! Only a qualified
person must install this
appliance.
Warning! Risk of injury or
damage to the appliance.
Remove all the packaging.
Do not install or use a damaged appliance.
Follow the installation instruction supplied with
the appliance.
Keep the minimum distance from the other
appliances and units.
Always take care when moving the appliance as
it is heavy. Always use safety gloves and
enclosed footwear.
Seal the cut surfaces with a sealant to prevent
moisture to cause swelling.
Protect the bottom of the appliance from steam
and moisture.
Do not install the appliance adjacent to a door
or under a window. This prevents hot
cookware to fall from the appliance when the
door or the window is opened.
If the appliance is installed above drawers make
sure that the space, between the bottom of the
appliance and the upper drawer, is sufficient for
air circulation.
The underside of the appliance can get hot
when in use. If an oven has not been fitted
underneath the hob and underside of the
appliance is accessible and could allow a user or
items stored beneath the hob to come in direct
contact with the underside of the hob, an
intermediate protection panel must be fitted.
Plywood or kitchen carcass material is
acceptable for the panel.
The panel must be removable for servicing.
Screws used to fix the panel must be accessible
after installation.
Electrical Connection
Warning! Risk of fire and
electrical shock.
All electrical connections should be made by a
qualified electrician.
The appliance must be earthed.
Before carrying out any operation make sure
that the appliance is disconnected from the
power supply.
Make sure that the parameters on the rating
plate are compatible with the electrical ratings
of the mains power supply.
Make sure the appliance is installed correctly.
Loose and incorrect electricity mains cable or
plug (if applicable) can make the terminal
become too hot.
Use the correct electricity mains cable.
Do not let the electricity mains cable tangle.
Make sure that a shock protection is installed.
Use the strain relief clamp on the cable.
Make sure the mains cable or plug (if applicable)
does not touch the hot appliance or hot
cookware, when you connect the appliance to
the near sockets
Do not use multi-plug adapters and extension
cables.
Make sure not to cause damage to the mains
plug (if applicable) or to the mains cable.
Contact our Authorised Service Centre or an
electrician to change a damaged mains cable.
The shock protection of live and insulated parts
must be fastened in such a way that it cannot be
removed without tools.
Hob User Manual
5
Page view 4
1 2 3 4 5 6 7 8 9 10 ... 27 28

Comments to this Manuals

No comments