John Lewis JLDWW906 User Manual

JLDWW 906DishwasherInstruction manual

Programme Degree of soil Type of load Programme descriptionRinse holdAny.Partial load (to becompleted laterin the day).1 cold rinse (to avoid food scr

When the dishwasher is firstinstalledBefore using your dishwasher for the firsttime:• Ensure that the electrical and waterconnections comply with the

Water hardnessAdjusting the water hardnesssettingUse of saltClarke °TH mmol/l manually electronically< 5 < 7 < 0,7 1 level 1 noSetting the wa

Filling with dishwashersaltWarning! Only use salt specificallydesigned for use in dishwashers. Allother types of salt not specificallydesigned for use

2. Add the rinse aid in the container. Themaximum level for filling is indicated by"max".The dispenser holds about 110 ml of rinseaid, which

Daily use• Check if it's necessary to refill withdishwasher salt or rinse aid.• Open the door and slide out the baskets toload the dishes.• Load

The lower basketThe lower basket is designed to takesaucepans, lids, plates, salad bowls, cutlery,etc.Serving dishes and large lids should bearranged

1. Place the cutlery basket on a firm support(table, worktop) and unfold both handleparts.2. After unfolding, fold back both handleparts.The upper bas

Maximum height of the dishes in: the upperbasketthe lowerbasketWith upperbasket raised20 cm 31 cmWith upperbasketlowered24 cm 27 cmTo move to the hig

20 = approximately 20 g of detergent30 = approximately 30 g of detergent3. All programmes with prewash need anadditional detergent dose (5/10 g) thatm

Important safety informationIt is most important that this instruction book should be retained withthe appliance for future reference. Should the app

Multi tab functionThis appliance is equipped with the Multi tabfunction, that allows the use of combidetergent tablets.These products are detergents w

5. To memorise the operation, switch off thedishwasher by pressing the On/offbutton.If you decide to revert back tothe use of individual detergentswe

Setting and starting theprogramme with delaystart1. After having selected the washingprogramme, press one of the delay startbuttons until the flashing

Unloading the dishwasher• Hot dishes are sensitive to knocks. Thedishes should therefore be allowed to cooldown before removing from the appliance.• E

7. Put the flat filter back in the base of thewashing compartment and ensure that itfits perfectly.8.Place the coarse filter (A) in themicrofilter (B)

Something not workingThe dishwasher will not start or stops duringoperation.Certain problems are due to the lack of simplemaintenance or oversights, w

Malfunction Possible cause and solutionThe programme does not start• The dishwasher door has not been properly closed.Close the door.• The main plug i

The wash results are not satisfactoryThe dishes are not clean• The wrong programme has been selected.• The dishes are arranged in such a way as to sto

Technical dataDimensions WidthHeightDepth45 cm85 cm61 cmElectrical connection - Voltage - Overallpower - FuseInformation on the electrical connection

Remove the machine’s worktop byunscrewing the two rear retaining screws (1),pull the worktop from the back of the machine(2) and slide out the front s

• Keep all detergents in a safe place out ofchildren’s reach.• Keep children well away from thedishwasher when the door is open.Correct use• This dish

The water inlet hose must not be kinked,crushed, or entangled when it is beingconnected.The appliance features inlet and drain hoseswhich can be turne

When connecting the drain hose to anunder sink trap spigot, the entireplastic membrane (A) must beremoved. Failure to remove all themembrane will resu

Electrical connectionWarning! Safety standards requirethe appliance to be earthed.Prior to using the appliance for the firsttime, ensure that the rate

4. The purchase date (found on yourreceipt).5. The model and serial number of theappliance (found on the rating plate).So that you always have these n

34

35

John Lewis Partnership171 Victoria StreetLondon SW1E 5NNwww. johnlewis.com117971560 - 00 - 022008 - Subject to change without notice

•45°-70° Auto Wash Programme: Thismachine is fitted with a turbidity sensorwhich intelligently adjusts the temperatureand rinsing cycles during the wa

ContentsFor the userImportant safety information 2Description of the appliance 6Control panel 7The digital display 7Washing programmes 9Whe

Description of the appliance1. Upper basket2. Water hardness dial3. Salt container4. Detergent dispenser5. Rinse aid dispenser6. Rating plate7. Filter

Control panel1. On/Off button2. Programme selection buttons3. Multi tab button4. Half load button5. Delay start buttons6. Digital display7. Programme

The digital displayThe digital display indicates:• the level of hardness to which thewater softener is set,• the approximate remaining time ofthe runn

Always remember that whenperforming operations such as:• selecting a washing programme,• setting the water softener level,• activating/deactivating th