John Lewis JLDWW906 User Manual download pdf (Page 21)

5. To memorise the operation, switch off the

dishwasher by pressing the On/off

button.

If you decide to revert back to

the use of individual detergents

we advise that you:

1. Deactivate the Multi tab function.

2. Fill up the salt container and the

rinse aid dispenser again.

3. Adjust the water hardness setting

to the highest setting and perform

1 normal washing programme

without loading any dishes.

4. Adjust the water hardness setting

according to the hardness of the

water in your area.

5. Adjust the rinse aid dosage.

Select and start a washing

programme

Select the washing programme

and delay start with the door

slightly opened. The start of the

programme or the countdown of

the delay start will occur only

after the closure of the door.

Until then it is possible to modify

the settings.

1. Check that the baskets have been loaded

correctly and that the spray arms are free

to rotate.

2. Check that the water tap is opened.

3. Press the On/Off button. The dishwasher

must be in setting mode.

4. Press one of the two programme buttons

to select a washing programme. When a

programme is selected the corresponding

programme light illuminates and the

programme time flashes on the digital

display.

For the selection of the washing

programme see "Washing programmes"

chart.

Close the dishwasher door, the

programme starts automatically. In the

digital display the programme time is no

longer flashing but fixed with static light.

The selection of the washing programme can

be made with the door closed. Keep in mind

that this way, once a washing programme has

been selected you have ONLY 3 seconds in

which you can select: another washing

programme, delay start and half load option.

After these 3 seconds the selected

programme will start automatically.

21

1 ... 20 21 22 ... 36

Comments to this Manuals

No comments