John Lewis JLBIHD608 User Manual

JLBIHD608built-in cooker hoodInstruction manual

10Electrical Connections Electrical RequirementsAny permanent electrical installation must comply with the latest I.E.E. Regulations and local Electri

11Using the cooker hoodThis cooker hood is designed to evacuate unpleasant odours from the kitchen, it will not extract steam. Cooker Hood ControlsThe

12 Before carrying out any maintenance or lean-ing isolate the cooker hood from the mains supply. The cooker hood must be kept clean, as a build up

13 Before carrying out any maintenance or cleaning isolate the cooker hood from the mains supply.Charcoal FiltersIn the recirculation mode the charco

14Something not WorkingRepairs and After Sales ServiceIf the appliance is not working correctly, please carry out the following checks, before contact

436003465_03 - 070208John Lewis Partnership171 Victoria StreetLondon SW1E 5NNwww.johnlewis.com0107

2Important Safety Information It is most important that this instruction manual should be retained with the appliance for future reference. Should th

3For the UserImportant Safety Information 2Description of the Appliance 4Using the cooker hood 11Cooker Hood Controls 11To Operate 11Recirculatio

4Description of the Appliance

5Please ensure that when the appliance is installed it is easily accessible to an engineer in the event of a breakdown. All installations must comply

6 Removing and Fitting the VisorWhen installing or cleaning the it will be necessary to remove the visor, inlet grilleTo remove the visor from the co

7 Fitting the Wall BracketsThe cooker hood may be be fitted to any vertical surface. All the fittings required for installation are contained in a pol

8 Fitting the Decor PanelThe dimensions of the decor panel to be fitted should be (W) 59.6 cm x (H) 45 cm.To fit the decor panel onto the cooker hood:

9Extraction (Ducted)The cooker hood is more effective when installed in the extraction mode (ducted to the outside).Venting kits may be purchased thro