John Lewis JLBIHD608 User Manual download pdf (Page 9)

Extraction (Ducted)

The cooker hood is more effective when installed in the

extraction mode (ducted to the outside).

Venting kits may be purchased through your retailer or

DIY store, and must be evacuated through an outside

vent of ø120 (5ins).

The ducting used must be manufactured from fire

retardent material conforming to the relevant British

Standard or DIN 4102-B1.

When the cooker hood is ducted to the outside

the charcoal filter must be removed.

Fitting the Ducting

• T

he Ø120 mm ducting spigot must be fitted into the

apperture on top of the cooker hood and sealed

to make an air tight connection.

• For the best performance use the shortest possible run

of ducting and we recommend the use of rigid pipe in

preference to flexible hose as this will improve the flow

of air while reducing turbulence, which causes noise and

a loss of performance.

• If the room where the cooker hood is to be used contains

a fuel burning appliance such as a central heating boiler,

then its flue must be be of the room sealed or balanced

flue type.

• If other types of flue or appliances are fitted ensure that

there is an adequate supply of air to the room.

• The cooker ducting when fitted in the extraction mode

must never be connected to central heating flues, radiators

or water heaters.

Recirculation Mode

The charcoal filter must be fitted for recirculation and the

slide control must be in the recirculation position.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

No comments

John Lewis JLBIHD608 User Manual Page 9