John Lewis JLDWW1201 User Manual download pdf (Page 21)

1. Check that the baskets have

been loaded correctly and that

the spray arms can rotate freely

2. Turn on the water tap

3. Close the dishwasher door

4. Press the On/Off button

The On/Off indicator light illuminates.

5. Setting and starting the

programme

To select a programme,press the button of the

programme you wish to select,(see "Washing

programmes" chart),the indicator light of the selected

programme button illuminates and in the digital display

will appear,flashing,the running time of the programme

that has been set (in minutes).

After about 3 seconds from the last pressure of a button

the programme starts automatically.

In the digital display the running time of the programme is

no longer flashing.

Setting and starting the programme with

the delay start

The setting of the delay start occurs before selecting

the programme

Press the delay start button until the flashing number of

the hours for the delay start will appear in the digital

display (from 1h to 19h).

Select a washing programme (see “Washing programmes”

chart).In the digital display will appear,for a moment,the

running time of the programme and then again appears

the selected delay start time.

As soon as the number of hours is displayed without

flashing,the countdown for the delay start is active.The

countdown will decrease with steps of 1 hour.

The opening of the door during the countdown will not

modify the delay start.

Once the delay start has elapsed the programme will

start automatically.

Note:

it is possible to select a washing programme and

the delay start with the door open.

In this case the start of the programme or the count-

down will only commence after the closure of the door.

Until that moment it is possible to modify the settings

made.

6. To interrupt or cancel a washing

programme in progress

Interrupt or cancel a washing

programme in progress ONLY if it’s

absolutely necessary.

Attention!

Hot steam may escape when the door is

opened.

Open the door carefully.

Interrupt a washing programme in

progress

a) Open the dishwasher door;the programme will stop.

Close the door;the programme will start from the

point at which it was interrupted.

b) Press the On/Off button,in this case all the indicator

lights turn off.Press the On/Off button again;the

programme will start from the point at which it was

interrupted.

Cancel a washing programme in progress

To cancel a washing programme you have to reset the

dishwasher;press simultaneously function buttons 2 and

3 for about 2 seconds.After about 2 seconds all the

indicator lights will turn off (except for the On/Off

indicator light and eventually the rinse aid and salt

indicator lights) indicating that the running programme

has been cancelled.

If a new washing programme is to be selected,check that

there is detergent in the detergent dispenser.

7. To cancel a delay start

To cancel a delay start in progress you have to reset the

dishwasher;follow the same instructions given in “Cancel

a washing programme in progress”.Cancelling a delay

start involves also the cancelling of the washing

programme set.

In this case you have to set the washing programme

again.

8. End of the washing programme

The dishwasher will automatically stop.

The indicator light of the programme just ended will

remain on.

In the digital display appears 0,only in this case the

programme has ended.

Switch off the dishwasher by pressing the On/Off button.

Open the dishwasher’s door,leave it ajar and wait a few

minutes before removing the dishes;in this way they will

be cooler and the drying will be improved.

Starting a Washing Programme

1 ... 20 21 22 23 24 25 26 27 28

Comments to this Manuals

No comments

John Lewis JLDWW1201 User Manual Page 21

Comments to this Manuals

Related products and manuals for Dishwashers John Lewis JLDWW1201