Warning! Before opening the pump
door, switch the appliance off and
remove the mains plug from the
socket.
Proceed as follows:
1. Unplug the appliance.
2. If it is necessary, wait until the water has
cooled down.
3. Open the pump door.
4. Place a container close to the pump to
collect any spillage.
5. Pull out the emergency emptying hose,
place it in the container and remove its
cap.
6. When no more water comes out,
unscrew the pump cover by turning it
anti-clockwise and remove the filter. Use
pliers, if necessary. Always keep a
towel
nearby to dry up any water spillages when
removing the cover.
Clean the filter under a tap, to remove
any traces of fluff.
7. Remove foreign bodies and fluff from the
filter seat and from the pump impeller.
8. Check carefully whether the pump
impeller rotates (it rotates jerkily). If it
doesn’t rotate, please contact your
Service Centre.
26
Comments to this Manuals