John Lewis JLDWW1206 User Manual Page 20

  • Download
  • Add to my manuals
  • Print
  • Page
    / 36
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 19
If the drying results are not
satisfactory we suggest that you:
1. Fill up the rinse aid dispenser with
rinse aid.
2. Activate the rinse aid dispenser.
3. Set the rinse aid dosage to position
2.
The activation/deactivation of the
rinse aid dispenser is only possible
with the Multi tab function active.
If you decide to revert back to the use
of individual detergents we advise that
you:
1. Deactivate the Multi tab function.
2. Fill up the dispensers for salt and
rinse aid again.
3. Adjust the water hardness setting
to the highest setting and perform
1 normal washing programme
without loading any dishes.
4. Adjust the water hardness setting
according to the hardness of the
water in your area.
5. Adjust the rinse aid dosage.
Select and start a washing
programme
1. Check that the baskets have been loaded
correctly and that the spray arms are free
to rotate.
2. Check that the water tap is opened.
Set the washing programme, delay
start and half load with the dishwasher
door slightly open.
The selection can also occur with the
door closed. Keep in mind that this
way you have ONLY 3 seconds
between one selection and another,
after which the washing programme
will start automatically.
3. Switch on the dishwasher. The appliance
must be in setting mode: message
CHOOSE PROGRAMME displayed.
4. Select the washing programme by
pressing one of the programme scrolling
buttons.
If a button is pressed only once, the last
performed washing programme will be
proposed.
5. If required, postpone the start time of the
washing programme by using the delay
start option. The start of the washing
programme can be delayed for between 1
and 19 hours.
6. Close the dishwasher door, the
programme starts automatically. Once
the programme is running the display
shows:
the phases of the progress of the
programme,
updates the running time of the
programme.
7. If the start of the programme has been
postponed, the countdown will start
automatically once the dishwasher door is
closed.
20
Page view 19
1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 35 36

Comments to this Manuals

No comments