John Lewis JLDWW905 User Manual download pdf (Page 22)

8. End of the washing programme

The dishwasher will automatically stop.

The “End of cycle” indicator light illuminates.

The “Programme time” backlit light and the indicator light

of the programme just ended will remain on.

In the digital display appears 0,only in this case the

programme has ended.

The dishwasher’s drying system is provided with a device

that allows air to circulate inside the dishwasher to

prevent residual steam recondensing on the dishes as

water droplets.

Once the washing programme has ended

this device operates intermittently for other

20 minutes,as long as the dishwasher is

switched on.

If the On/Off button is pressed or the door is opened

during these 20 minutes,the device will be automatically

cancelled.

Switch off the dishwasher by pressing the On/Off button.

Open the dishwasher’s door,leave it ajar and wait a few

minutes before removing the dishes;in this way they will

be cooler and the drying will be improved.

9. Unloading the dishwasher

Hot dishes are sensitive to knocks.The dishes should

therefore be allowed to cool down before removing from

the appliance.

Empty the lower basket first and then the upper one;this

will avoid water dripping from the upper basket onto the

dishes in the lower one.

Water may appear on the sides and the door of the

dishwasher as the stainless steel will eventually become

cooler than the dishes.

When the washing programme has

finished,it is recommended that the

dishwasher is unplugged and the water

tap turned off.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 28

No comments

John Lewis JLDWW905 User Manual Page 22