John Lewis JLBIGH603 User Manual download pdf (Page 11)

The manufacturer refuses to

be held responsible, if these

safety measures are not

abided by.

Supply connections

This hob has to be connected to 220-240 V (~

50/60 Hz ) electricity supply.

The hob has a terminal block which is

marked as follows:

• L — Live terminal

• N — Neutral terminal

•

or E — Earth terminal

Before carrying out the connection, make sure:

1. The limiter valve and the electrical system can

take the appliance load (see the rating plate)

2. The supply system is equipped with an efficient

earth connection in compliance with the

current standards and regulations

3. The outlet or omnipolar switch used for

connection is easily accessible with the

appliance installed.

The appliance is supplied with a 3 core flexible

power cable with a 3 amp plug. If it is necessary

to change the fuse, use a 3 amp ASTA-approved

(BS 1362) fuse.

A B

C

D

E

A. Green and Yellow

B. 3 amp fuse

C. Brown

D. Cord clamp

E. Blue

The wires in the cord are coloured as follows:

Green and yellow - Earth

Blue - Neutral

Brown - Live

Warning! A cut off plug

inserted into a 13 amp socket

is a serious shock hazard.

Ensure that the cut off plug is

disposed of safely.

Replacement of the

connection cable

The replacement of electric cable

must be carried out exclusively by

the service force centre or by

personnel with similar

competencies, in accordance with

the current regulations.

To replace the connection cable

use only H03V2V2-F T90 or

equivalent type. Make sure that the

cable section is applicable to the

voltage load and the working

temperature. The yellow/green

earth wire (B) must be

approximately 2 cm longer than the

live and neutral wire (A).

A B

1. Connect the green and yellow (earth) wire to

the terminal which is marked with the letter 'E',

Hob User Manual

11

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 27 28

Comments to this Manuals

No comments