John Lewis JLBIOS618 User Manual download pdf (Page 19)

Clock functions

Clock functions table

Clock function Application

Minute Minder To set a countdown (max. 2 h 30 min). This function

has no effect on the operation of the appliance.

Use to activate the function. Press or to set

the minutes and to start.

Duration To set the length of an operation (max. 23 h 59 min).

End Time To set the switch-off time for a heating function (max.

23 h 59 min).

If you set the time for a clock function, the time

starts to count down after 5 seconds.

If you use the clock functions:

Duration, End Time, the appliance

deactivates the heating elements

after 90 % of the set time. The

appliance uses the residual heat to

continue the cooking process until

the time ends (3 - 20 minutes).

Setting the clock functions

• Before you use the functions:

Duration, End Time, you must set

a heating function and

temperature first. The appliance

deactivates automatically.

• You can use the functions:

Duration and End Time at the

same time if you want to

automatically activate and

deactivate the appliance on a

given time later.

1. Set a heating function.

2. Press again and again until the display

shows the necessary clock function and the

related symbol.

3. Press or to set the necessary time.

4. Press to confirm.

When the time ends, an acoustic signal sounds.

The appliance deactivates. The display shows a

message.

5. Press any symbol to stop the signal.

Heat + Hold

Conditions for the function:

• The set temperature is more than 80 °C.

• The function: Duration is set.

The function: Heat + Hold keeps prepared food

warm at 80 °C for 30 minutes. It activates after

the baking or roasting procedure ends.

Steam oven User Manual

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 55 56

Comments to this Manuals

No comments

John Lewis JLBIOS618 User Manual Page 19

Comments to this Manuals

Related products and manuals for Unknown John Lewis JLBIOS618